描述

The Reach M2 combined with the Reach RS2+ Base station, and the Reach LoRa Radio for M2/M+

完整的精密無人機解決方案，為您提供準確和精確的無人機製圖功能。

Reach M2 是一款緊湊、輕量級的多頻段 RTK 模組，用於即時導航和 PPK 映射。M2 可追蹤 GPS/QZSS （L1、L2）、GLONASS（L1、L2）、北鬥（B1、B2）、伽利略（E1、E5）和 SBAS（L1C/A），幾乎可以立即獲得固定解決方案。 Reach M2 允許在較長的基線上工作（與單頻相比） Reach M+），在RTK中長達60公里，在PPK模式下長達100公里。

LoRa 電臺

允許 Reach M2 可接收即時更正 Reach RS2.

• 頻率： 862-1020 MHz
• 輸出功率：100 mW
• 傳輸範圍：長達 8 km
• 天線連接器：RP-SMA

M2：專為無人機應用而設計

結構緊湊， Reach M2 可輕鬆整合到幾乎任何無人機平臺上。 Reach M2通過熱靴連接到相機，並記錄每張照片的位置，更新速率高達20赫茲。 最終，它產生更詳細和一致的數據集，用於各種專業製圖軟體的進一步地理參考。

螺旋 GNSS 天線

現代螺旋天線恭維 Reach M2 和在同一衛星星座之間運行，這樣您就不會錯過一顆衛星。螺旋天線無需大型接地層，但可實現高定位精度。

使用 ReachView 進行配置和日誌管理

Reach M2 可透過 ReachView 應用程式進行配置，適用於 Android 和 iOS。該應用程式允許設置RTK設置，收集RINEX格式的原始數據，並控制設備的所有功能。

Use with the Reach RS2+ base station

The Reach RS2+ is a multi-band RTK GNSS receiver with centimetre precision, designed for surveying, mapping and navigation. Reach RS2+ gets fix in seconds and provides positional accuracy down to a few millimetres. The receiver tracks GPS/QZSS (L1, L2), GLONASS (L1, L2), BeiDou (B1, B2), Galileo (E1, E5) and reliably works in RTK mode on distances up to 60 km, and 100 km in PPK mode. Multi-feed antenna with multipath rejection offers robust performance even in challenging conditions.

RINEX 原始資料日誌與 OPUS、CSRS-PPP、AUSPOS 和其他 PPP 服務相容，因此您現在可以在地球上的任何國家獲得釐米精確的結果。

BUILT-IN 4G LTE MODEM AND UHF LORA RADIO

Reach RS2+ features a power-efficient 4G LTE modem with 3G and 2G fallback and global coverage. Corrections can be accessed or broadcasted over NTRIP independently, without relying on Internet connection on your smartphone. For remote areas, Reach RS2+ has built-in LoRa radio that has proven to be a reliable link for RTK corrections on distances up to 8 km.

專為惡劣條件而設計

Reach RS2+ is engineered to be waterproof and impact-resistant. The body is manufactured in a two-step injection process and is made out of shockproof polycarbonate covered in a special elastomer for extra protection. The receiver has an industry-standard 5/8’’ mounting thread.

The LiFePO4 battery is designed for 16 hours work as a 4G RTK rover on one charge regardless of weather conditions. No need to carry spare batteries. Reach RS2 can charge from a USB wall charger or a power bank over USB-C. An RS232 interface allows to you to connect Reach RS2 directly to external hardware and output positioning in NMEA.