The GoSLAM RS-i range of mobile scanners offer a lightweight, weatherproof and afordable solution for most mobile scanning applications. There are three RS-i model in the range. Choose the one that fits your needs in terms of LiDAR point density and range. There’s also a wide selection of accessories available. Scroll to learn more…
GoSLAM RS100i
A compact, low-cost, easy-to-use mobile SLAM LiDAR unit with a scan range up to 120m. Built to withstand all weathers, the RS100i comes with a seamless mobile app interface that provides real-time scan feedback and monitoring. An optional 360 camera can be fitted for excellent point cloud colourisation.
GoSLAM RS100i-32
Physically identical to the standard RS100i, this unit has a higher resolution scanner with 32 laser lines, and a scan rate of 640,000 pts/sec, plus double the data storage capacity (1TB). The RS100i-32 also comes with a seamless mobile app interface that provides real-time scan feedback and monitoring. Again, an optional 360 camera can be fitted for excellent point cloud colourisation.
GoSLAM RS300i-32
An upgraded version of the RS100i-32 fitted with a longer range scanner, giving the unit an effective range of 300m. The RS300i-32 also comes with a seamless mobile app interface that provides real-time scan feedback and monitoring. Again, an optional 360 camera can be fitted for excellent point cloud colourisation.
GoSLAM RS-i Features
GoSLAM scanners are compact and light weight. They weigh just 1.3kg, and come with the rotating scanner fully protected and weather sealed.
The GoSLAM power module supports two batteries for uninterruptible power redundancy. Batteries can be hot-swapped while your scanner is still running and collecting data.
The unit also supports a range of data transmission methods, including access to a mobile hard drive, or USB connection via wired connections or wifi. The system incorporates an interface for collaboration with third-party systems, opening up even more possibilities.
Connect any GoSLAM RS scanner to your mobile device for a seamless and intuitive control interface. Control scanner settings, and preview your scans in real time, as you collect in the field.
A large colour status display screen on the back of each scanner also supports information and settings, as well as operating instructions making it easier to use and get started.
GoSLAM’s hybrid processing feature can perform post processing of the previous data set while the current scan is still taking place! This way, high precision data can be collected much faster and more efficiently.
GoSLAM Accessories
GoSLAM Backpack Kit
A lightweight backpack kit that can be used for carrying any of the GoSLAM mobile scanners. Supports quick installation with one click. Holds a GoSLAM scanner, and the twin-battery power pack.
An optional GNSS receiver can be fitted to the top of the backpack frame. With a GNSS receiver in RTK mode the scanner is able to achieve centimetre-level real-time positioning. High accuracy point cloud data can be obtained without the need for a closed loop.
GoSLAM Car Mount Kit
The GoSLAM Car Mount Kit is an easy to install kit for the top of a car, which can accommodate all GoSLAM RS series 3D laser scanners. Enjoy longer range, high speed data acquisition with the Car Mount.
Like the Backpack Kit, an optional GNSS receiver can be fitted to the car mount frame. With a GNSS receiver in RTK mode, the scanner is able to achieve centimetre-level real-time positioning. High accuracy point cloud data can be obtained without the need for a closed loop.
GoSLAM GCM Module
The GCM module supports backpacks and vehicle-mounted platforms, and can connect to a wide range of RTK GNSS receivers (including the Emlid RS3!) Quickly obtain RTK data while scanning via your preferred NTRIP service, or from another GNSS base station. Obtain accurate and reliable 3D data without the need for a closed-loop.
Emlid Reach RS3
The ideal GNSS receiver for your GoSLAM scanner. The Reach RS3 includes built-in tilt compensation, easy 4G network connection to your NTRIP service, and an intuitive app-based interface.
GoSLAM Software
No 3D mobile scanning system is complete without good post processing software behind it, and the GoSLAM RS range is no exception. GoSLAM LidarWorks is a complete, fully-featured desktop software application for the import, processing analysis and export of 3D data captured by GoSLAM scanners and cameras.
GoSLAM LidarWorks
GoSLAM LidarWorks desktop software has been specifically designed and developed for the GoSLAM scanner series. In addition, the software supports point cloud processing from other third-party devices.
Use LidarWorks to import your RS-i point cloud data. Optimise and clean your point clouds with features like noise reduction, smoothing and format conversion to comply with other third-party applications.
Combine GoSLAM scanner data sets from the same location: scan sets can be concatenated and merged together with one click. A splicing optimisation function effectively reduces splicing errors. Special features for volume calculation and mapping are also built into LidarWorks.
