REACH RS2+
Multi-band RTK GNSS receiver with centimetre precision
For surveying, mapping and navigation.
Comes with mobile app.
Baseline up to 100 km
Update rate 10 Hz
Gets a fix
in seconds
Reach RS2+ gets a fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimetre accuracy can be achieved on distances up to 60 km in RTK, and 100 km in PPK mode.
GPS, GLONASS, BeiDou,
Galileo, and QZSS
L1OF, L2OF, L1C/A, L2C,
E1B/C, E5b, B1I B2I
Built-in
LTE modem
Reach RS2+ features a power-efficient LTE modem with global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on an Internet connection on your phone.
PPP
support
RINEX raw data logs are compatible with PPP services so you can now get centimetre-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
22 hours
on 1 charge
Up to 22 hours of autonomous work when logging data and up to 16 hours as an LTE rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2+ can charge from a USB wall charger or a power bank over USB-C.
Reach RS2+ is an evolution of our popular Reach RS2 receiver
LTE Modem
Now you don’t need to worry about the possible sunset of 3G and 2G networks in your region. The new Reach RS2+ comes with a power-efficient LTE modem which is going to be available for next 10 years at least.
Dual diversity antennas
While Reach RS2 had one cellular antenna, RS2+ features dual diversity LTE antennas for better cell reception on the edge of networks.
20+ design improvements
Based on the extensive field experience with Reach RS2, we added more than 20 design improvements that are going to ease your workflow with RS2+, and make life much easier.
Surveying
with Emlid Flow
With Emlid Flow, you can collect and stake out points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.The app is available both for Android and iOS, and supports thousands of coordinate systems and is translated into multiple languages.
Point collection:
save points, and export data to CSV
Record each position as a point with centimetre precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.
Coordinate systems based on:
WGS84, NAD83, GDA2020, HK 1980 Grid,
and others
Stakeout:
find a point’s position on the ground
Stakeout is used to find exact physical locations of points. They can be collected in ReachView or imported from other CAD or GIS software.
Logging in RINEX:
record raw data, position, and base correction logs
Record raw data, position and base correction logs. Point collection and recording of RAW data are independent processes and can be used simultaneously. ReachView has a simple and intuitive interface for logging configuration and control.
We provide our version of RTKLib for PPK. It’s free and can be downloaded from our docs.
16 GB
storage
160+ days
of logging at 1 Hz
PPP for OPUS
RINEX raw data logs are compatible with PPP services so you can now get centimetre-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
Compatibility
Real-time position
streaming in NMEA
Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.
Reach can turn on and off automatically
Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor.
Compatible apps
FieldGenius for Android, ESRI Collector, QField and others
Position Streaming
Interfaces:
RS-232, TCP, Bluetooth
NTRIP or another Reach
as a base station
Reach RS2+ needs a base station as a source of corrections. That’s a requirement for centimetre accuracy in RTK and PPK. Base might be either another Reach RS2+ receiver or an NTRIP service. VRS is also supported.
Reach RS2+ works seamlessly with other Reach receivers over any link.
Input and output corrections
Interfaces:
TCP, LoRa, Bluetooth, RS-232, NTRIP
Formats:
RTCM3
Max distance from a base
Over 60 km in RTK
100 km in PPK
Any place on Earth with PPP
Engineered to be tough
Reach RS2+ is designed to work in the most challenging environments
-20ºС…+65ºС
We extensively tested Reach RS2+ in conditions that simulate coldest winters and hottest summers.
IP67
RS2+ is waterproof up to 1 m depth. All connectors are completely sealed and protected from water and dust with silicone plugs.
Polycarbonate body
Polycarbonate, an extremely durable material that is used in bulletproof glass, makes Reach RS2+ impact-resistant
Covered with elastomer
This is a rubber-like material that forms a shock absorber around the whole device. In a sophisticated manufacturing process, elastomer is permanently bonded to the polycarbonate base so that if your bipod falls over, Reach RS2+ will bump off, no marks left.
Rugged 5/8″ mount
A precision CNC machined threaded mount is inserted during the molding process and becomes one with the plastic.
The metal mount works as a heatsink, transferring heat away from the electronic components and ensuring stable operation in a hot climate.
LoRa radio
868/915 MHz
Frequency range.
Up to 8 km
At only 100mW.
300% more range
Compared with FSK radios at the same power.
LoRa Spread Spectrum modulation can work on distances up to 4 times longer compared with traditional FSK radios at the same power output. This gives Reach RS2+ robust radio performance without sacrificing battery life. LoRa radio is used to connect rover to base when Internet-delivered corrections are not available.
Industrial battery
LiFePO4
Industrial battery that handles both high and low temperatures well.
USB-C
Reach RS2+ charges from any USB port and power bank.
2 000+ cycles
of charging and discharging while maintaining original capacity.
Reach RS2+ works for up to 22 hours in static logging and up to 16 hours in RTK with cellular on. You don’t need to worry about having spare batteries or replacing them in the field. Hot-swaps are a thing of the past.
Compact and lightweight
Reach RS2+ is designed to work even in the most challenging environments.
126 х 142 mm
Fits in a small bag.
950 g
Weighs less than a typical survey pole.
Comes with LoRa antenna, USB cable, and carrying case with a strap
Download the full spec datasheet
Buy now!
Shop with confidence in our secure online store. Free delivery in Hong Kong!
